Loading... Please wait...

Our Newsletter

Oil Injector Tool - 1/4"- Premium - Oil, Dye, Ect.-Screw Type -1/4 to 2oz.

  • Image 1

Product Description

1/4" Premium Oil Injector Tool. Injection cylinder can hold between 1/4 to 2 oz. of fluid. Hose length is approximately 9 in. with a straight 1/4" brass deep knurled low loss fitting on the end of the hose.  This injector tool is the screw-in type and does not need pressure from the system to add stop leak, dye, oil, enhancer, ect., to the system.  Brand new and made by Envirosafe Refrigerants Inc. Can be used multiple times without clogging. I use this tool on practically every system I work on to add oil, dye and especially enhancer which coats the copper lines and the compressor parts, thus prolonging the life of the compressor, improves the flow of refrigerant up to 1500% and adds new life to a worn compressor.  Be sure to purge (remove air) from the injector tool before connecting to the system by screwing down the outer tube a few turns until you feel a slight pressure and then use a phillips screwdriver or other tool to press down on the valve core depressor on the end of the hose, which then removes a small amount of oil/dye/ect. from the end of the hose, thus removing any air in the hose. Is designed to work with most AC systems which have 1/4" access valve fittings, but can also be used on autos by adding a quick coupler to the end of the hose.




Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Oil Injector Tool - 1/4"- Premium - Oil, Dye, Ect.-Screw Type -1/4 to 2oz. to your wish list.

You Recently Viewed...